OS LUBE PLUS - Multi Function Lubricant
Lubricity
Drilling fluid lubricity is a key parameter in achieving high ROPs. Drilling fluid lubricity directly affects power transmission to the bit and BHA. Excessive torque and drag leads to slow ROPs, drill-string failures and expensive fishing jobs and side-tracks. Drilling fluid lubricity is especially important in directional wells in both cased and open hole. A good lubricant can make the difference between success and failure.
Product Information
OS LUBE PLUS is a solution of modified natural oils with the addition of antifoaming properties. This product exhibits excellent properties as well as other surface active properties such as emulsification and wetting.
OS LUBE PLUS is used in any drilling or workover operation where excessive torque or drag is seen or anticipated.
Typical Physical Properties
Appearance – Dark Amber Liquid
S.G. @ 25oC – 0.85 – 0.90
Flash Point – >65oC
Boiling Point – >150oC
Viscosity @ 25oC – 300 cps
pH (10% IPA/H20) – 7 – 8
Pour Point – -12oC
Advantages
OS LUBE PLUS disperses easily in all water-based drilling fluids and combines excellent lubricity properties with strong antifoam characteristics.
Application
OS LUBE PLUS should be applied at a dosage of approximately 0.02 – 0.1% by volume for brines or 1-2% by volume for weighted fluids. However, concentrations can vary greatly depending upon the severity of the problem encountered.
Packaging
OS LUBE PLUS is packaged in drums, net weight 180 kgs.